How To Paint A Pool Slide
How to Paint Fiberglass Pool Slides
Fiberglass puddle slides share similar construction methods with other fiberglass objects, such equally boats. Fiberglass fabric is laid upward in a mold and saturated with catalyzed polyester resin, which hardens and forms a stiff, resilient unit.
A puddle slide painted with gel glaze creates a tough, waterproof finish.
Color and protection from wear and water intrusion are provided by a layer of gel coat on the surface. Gel coat bonds with the fiberglass resin and forms a tough shell that is resistant to the effects of wear and is superior to any type of household or marine paint. The gel-glaze surface also makes the slide slippery, which promotes the function of the slide.
- Masking or painter's record
- Pre-tinted gel coat
- Acetone
- Clean plastic container
- MEK goad
- Paint stir sticks
- 600 dust moisture/dry out sandpaper
- Surfacing agent
- Polishing chemical compound (optional)
- Electric buffer (optional)
Tip
Working time on properly catalyzed gel coat is x to xv minutes at 70 degrees Fahrenheit. College air temperatures and straight sunlight can drastically reduce this working fourth dimension. To minimize waste product, do not mix more than gel coat than you can use comfortably within 10 minutes.
-
Mask off all metal fittings or other parts of the slide that are not to be painted. Utilise low-tack painters tape or masking tape and ensure that the edges are secure to forbid wet gel coat from haemorrhage under the record.
-
Thin 1/two gallon of pre-tinted gel coat with acetone in a clean plastic container to help it flow and get out a smooth cease. Add together the methyl ethyl ketone (MEK) goad and mix well with a make clean paint stir stick according to the manufacturer's instructions, or at two to 4 fluid ounces per gallon, as a rule of pollex.
-
Roll or brush the catalyzed gel coat onto the areas of the slide that are to be painted. Apply the gel coat in a thin, even coat and avert causing runs or sags that will add labor to the sanding process. Mix more gel coat as needed and glaze the entire surface of the slide.
-
Permit the gel coat to harden. Sand out whatever heavy brush marks or roller stipple with 600 dust wet/dry out sandpaper and water.
-
Let the water to evaporate and repeat Steps 3 and 4 until the desired coverage and thickness are accomplished. Add surfacing agent to the last coat, according to the manufacturer's instructions, to cause the gel coat to harden tack free.
-
Let the gel coat to harden. Carefully remove the masking tape. Clean all tools with acetone. Polish the slide with polishing compound and an electric buffer, if a high-gloss finish is desired.
The Drip Cap
- Fiberglass puddle slides share similar construction methods with other fiberglass objects, such as boats.
- Mask off all metallic fittings or other parts of the slide that are not to be painted.
- Apply the gel coat in a sparse, even coat and avert causing runs or sags that will add labor to the sanding procedure.
- Allow the gel glaze to harden.
- Make clean all tools with acetone.
Source: https://homesteady.com/13418216/how-to-paint-fiberglass-pool-slides
0 Response to "How To Paint A Pool Slide"
Post a Comment